TV Mounting in Salt Lake City, Utah

Salt Lake City, Utah

TV Mounting in Salt Lake City, Utah

Clean TV mounting in Salt Lake City by Cam. Wires hidden, any wall type — plaster, brick, or lath. Owner-operated, no crews. Free quote.

I'm Cameron — most people call me Cam. I mount TVs across Salt Lake City myself. No dispatched crew, no rotating subcontractors. You text me, I show up, I do the work.

A TV on the wall is easy. A TV on the wall with zero visible wires, dead level, and anchored into something that will actually hold it — that's the part people call me for. I bring my own stud finder, oscillating tool, and a bag of anchors for every wall type this city throws at me.

I cover the whole valley: the Avenues, Sugar House, Federal Heights, Marmalade, Rose Park, Millcreek, Holladay, plus the newer builds out in Daybreak and the Draper foothills. If you can text me a photo of the wall and the TV, I can usually quote you the same day.

Why it matters in Salt Lake City

Salt Lake has two kinds of walls and they fight you in opposite ways. The pre-1940 homes in the Avenues and Marmalade are lath-and-plaster — the studs are real full-dimension lumber, they're often spaced at odd intervals instead of a clean 16 inches, and plaster crumbles if you drill it wrong. A $30 no-name mount and drywall screws will pull straight out of that wall with a 65-inch TV on it. I use toggle-backed lag anchors into the actual framing, and I drill plaster slow with the right bit so the face doesn't blow out.

Then there's the other half of the city — the downtown lofts, the new Sugar House mid-rises, and the tract homes going up in Daybreak and the south valley. Those are often steel studs, concrete, or brick, and each needs a completely different anchor. Salt Lake's a fast-growing metro (the county's added well over 100,000 people in the last decade), so I'm in a brand-new Draper build one morning and a 100-year-old Ave's house that afternoon. I stock hardware for all of it so I'm not the guy making a Home Depot run halfway through your job.

If your place was built before the 1950s in the Avenues or Marmalade, tell me when you text — plaster-and-lath walls take extra care and I'll bring the right bits so I don't crack your original wall.

What's included

TV Mounting in Salt Lake City, done right

  • Full in-wall wire concealment — HDMI and power routed inside the wall to a code-compliant recessed outlet, so nothing dangles
  • Correct anchoring for your exact wall: lath-and-plaster, drywall over wood stud, steel stud, brick, or poured concrete
  • Stud and framing scan before I drill a single hole, so the mount lands on solid wood, not just lath
  • TV pulled dead level with a laser, tilt/height set for your actual couch and seating distance
  • Mount hardware matched to your TV's weight and VESA pattern — I'll flag it if the mount you bought is undersized before we start
  • Cable box, soundbar, and streaming gear tucked and tidied so the cord bundle doesn't ruin the clean look
More on tv mounting

Good to know

TV Mounting in Salt Lake City — questions

Local answers. Anything else, just text me.

Can you hide the wires in a plaster wall in an older Avenues or Sugar House home?

Usually yes. Plaster walls have real stud bays behind them, so I can fish an HDMI and power kit down the wall to a recessed outlet — same clean look as drywall. The one catch is old homes sometimes have fire blocking or an odd stud layout, so I always check with a scan first. In maybe 1 out of 10 plaster homes the framing is too packed to fish cleanly, and I'll tell you that up front and run a paintable low-profile channel instead.

How much does TV mounting cost in Salt Lake City?

A straightforward mount on a wood-stud drywall wall with basic cord concealment typically runs $150 to $250. Full in-wall wire hiding with a recessed outlet adds roughly $75 to $150 depending on the wall. Plaster, brick, or concrete walls and TVs over 75 inches are on the higher end because they take more time and heavier hardware. I quote a flat price before I start — no hourly surprises.

Do I need to worry about my HOA in a Daybreak or Draper build?

For interior TV mounting, no — HOAs don't govern the inside of your home. It only matters if you want an outdoor TV on a patio or a satellite dish on the exterior, where South Jordan and Draper HOAs often have rules about anything visible from the street. If that's your project, check your CC&Rs first and I'll build the install to match what they allow.

Also in Salt Lake City

More of what I do around Salt Lake City

Free quote · No pressure

Ready for tv mounting in Salt Lake City?

Tell me what you're picturing — a TV over the fireplace, a theater in the basement, cameras, a network that finally reaches the whole house. I'll get you a straight quote, usually within the hour.

Licensed & insured No hidden fees You talk to Cameron, not a call center

Call Cameron Free Quote