Park City, Utah
Smart Home Automation in Park City, Utah
Whole-home automation, networking, and remote monitoring in Park City, UT. Owner-operated by Cam. Watch and control your second home from anywhere.
I'm Cam, and I install smart home systems all over Park City and the Snyderville Basin. Most of my automation work isn't for people who want to talk to their lights for fun. It's for owners who are 600 miles away in California or Texas and need to know their place in Deer Valley or Promontory is fine when it's 8 degrees out and nobody's there.
A lot of these houses sit empty for weeks at a time. A frozen pipe at 7,000 feet doesn't wait for you to fly in. Good automation catches the problem before it floods a finished basement, and it lets you actually run the house from your phone instead of hoping a caretaker checked in.
I do the whole thing myself, start to finish. No sales rep, no rotating crew. You get me on the install and you get me when something needs a look.
Why it matters in Park City
Park City runs on second homes. A big share of the housing stock here is owned by people who don't live in Utah full-time, and that changes what automation has to do. It's not about convenience, it's about eyes on an empty house. I set systems up so you get an alert when a temperature sensor drops below 50, when a door opens, or when a leak sensor under the water heater gets wet, and I tie in remote monitoring so you or your property manager can respond before it becomes a $40,000 water claim.
The other thing is connectivity. Cable and internet up here get flaky, especially during storms and up the canyons and in the newer builds out in Silver Creek, Jordanelle, and Promontory where infrastructure is still catching up to construction. If your internet drops, so does your remote access and half your smart devices. That's why I build the network first with a proper router, cellular failover backup, and mesh coverage that actually reaches the garage and the outdoor spaces, then layer automation on top of something that won't quit on you.
I've wired plenty of homes from Old Town to Promontory and Tuhaye, and the ones with older Old Town wiring and thick log walls almost always need mesh done carefully, not one router shoved in a closet.
What's included
Smart Home Automation in Park City, done right
- Whole-home automation that ties lighting, climate, shades, locks, and AV into one app so you're not juggling six different logins
- Networking done right: business-grade router, mesh Wi-Fi that covers the whole footprint including detached garages and decks, and cellular failover so a cable outage doesn't take your monitoring offline
- Remote monitoring built for empty houses: freeze/low-temp alerts, leak sensors at the water heater, boiler, and washer, and door/entry notifications sent straight to your phone
- Away and vacation modes that drop heat to save on the bill, then warm the house back up on a schedule before you land at SLC
- Camera and doorbell integration so you and your property manager can verify who's at the door and confirm the plow or cleaner actually showed
- Setup and handoff for property managers and caretakers so the right people get the right alerts without full access to everything
Good to know
Smart Home Automation in Park City — questions
Local answers. Anything else, just text me.
Can I really control and watch my Park City house from out of state?
Yes, that's most of what I do. Once the network is solid, you run climate, lighting, locks, and cameras from one app anywhere with cell or Wi-Fi. I set alerts for low temperature, leaks, and entry so you hear about a problem in minutes instead of on your next trip up. I usually recommend cellular failover, roughly a $200 add plus a small monthly SIM cost, so your monitoring stays live even when Park City internet goes down in a storm.
What happens to my smart home when the internet or power goes out?
That's the first thing I plan for up here. I add cellular backup to the network so remote access and alerts keep working through a cable outage. For power, I recommend a UPS battery on the network gear so the router, modem, and key sensors ride through short outages, and for homes that lose power often I'll spec a generator tie-in. Local automations like schedules keep running on the equipment even if the cloud is briefly unreachable.
How much does whole-home automation cost in Park City, and how long does it take?
It depends on the house, but a solid networking and remote-monitoring package for a typical Basin or Deer Valley home usually lands in the $4,000 to $12,000 range, and a fully automated larger home with lighting, shades, and AV goes up from there. Most jobs take me 2 to 5 days on site. I'll walk your house, tell you what actually matters for your situation, and give you a flat number before I start, no guessing on the invoice.
Also in Park City
More of what I do around Park City
Free quote · No pressure
Ready for smart home automation in Park City?
Tell me what you're picturing — a TV over the fireplace, a theater in the basement, cameras, a network that finally reaches the whole house. I'll get you a straight quote, usually within the hour.
Licensed & insured No hidden fees You talk to Cameron, not a call center